Product ID:THINNER 4-060/TH6862/4-05, GTA007
MSDS Date:07/05/1989
FSC:8010
NIIN:01-272-4050
MSDS Number: BJYNG

INTERNATIONAL PAINT (USA) INC.

UNION, NJ 07083
US

Emergency Phone: 800-854-6813

Info Phone: 713-682-1711

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 95-100%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC OVEREXPOSURE TO, AND MISUSE
OF, SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE.
Effects of Overexposure:EYES:CAN CAUSE IRRITATION WITH REDNESS, TEARING
AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN DERMATITIS.
INHALATION:IRRITATION OF RESPIRATORY TRACT. HEADACHE, DIZZINESS AND
UNCONSCIOUSNESS. INGE STION:MAY CAUSE GASTRO-INTESTINAL IRRITATION.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:REMOVE
CONTAMINATED CLOTHING. WASH SKIN WITH PLENTY OF SOAP AND WATER.
LAUNDER CLOTHES B EFORE REUSE. INHALATION:REMOVE TO FRESHAIR. GIVE
ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGESTION:CALL A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMITING.

Flash Point:80F/27C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/EXT MEDIA.USE H2O TO COOL
UNOPEN CONTAINERS,NOT AS EXT MEDIA.TAKE CARE TO PREVENT SPREAD OF
BURNING LIQUID W/H2O.CLOSED CONTAINERS MAY EXPLODE.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBANT
MATERIALS.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS W/NFPA CLASS. AVOID BREATHING DUST/CHIPS
FROM SANDING/BLASTING SURFACES COATED W/PRODUCT
Other Precautions:RECOMMEND GROUNDING AND BONDING OF CONTAINERS WHEN
TRANSFERRING LIQUIDS AND POWDERS TO AVOID STATIC CHARGE BUILD UP.

Respiratory Protection:IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT,USE A
FILTER RSPRTR TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLICATION.IN RESTRICTED VENT AREA,USE RSPRTR IN
ACCORD W/29 CFR 1910 TO REM OVE A COMBINATION OF
PARTICULATES/VAPORS
Ventilation:PROVIDE SUFFICIENT VENTILATION IN VOL/PATTERN TO KEEP
TLV/LEL BELOW LIMITS/TO REMOVE DECOMP PRODUCTS DURING WELD/CUTTING
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES,CHEM GOGGLES/FACESHIELD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:230 TO 280F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.